Contact

T-Series

T-Series

The MOGAS T-Series trunnion-mounted ball valve is available in either metal-seated and soft-seated from 3 to 60 inch, and two- or three-piece designs, with operating temperature from -50° F to 400° F (-45 to 204° C).

The valve retains many of the time-tested features of the C-Series, such as an actuator mounting pad, but with a trunnion design. Its reduced operating torque results in an overall less expensive valve and actuator package.

Brand: Mogas
Category: Trunnion Mounted

3 to 60 inch (80 to 1500 DN)

Bi-directional

API 6D or ASME B16.34

Suitable temperature range: –50 to 400° F (–46 to 204° C)

Suitable for high-cycle services

ASME 150 to 2500 Class (not all size / pressure class combinations available)

Metal seated or soft seated

Fire safe design

Cast or forged body

Process and customer-specific body and trim materials

Process and customer-specific coatings

Adjustable or non-adjustable stem packing

Spiral-wound body gasket or O-ring body joint seals

Slurry and Wastewater Transportation By-pass lines
Underground dewatering
Seawater pipelines
Industrial waste water
Autoclave Steam/recovery plant
Power Generation Boiler feed water
Fuel gas lines
Oil & Gas Drains and secondary isolation applications for:
Heater vessels
Steam applications
Vents
High pressure air
Quench and flash vessels
High cycle applications
Chemical / Petrochemical Hydrocarbon
Vapor products
Slurry
Liquid
Large diameter applications
Amines, MDEA
Refining Oxygen, hydrogen, nitrogen
Cold, high pressure separation
Cutting water pump isolation
Reactor overhead line
Amines
Title Performance. Guaranteed.
Introduction The world's first application-specific PERFORMANCE GUARANTEE…plus a Lifetime Warranty on materials and workmanship.
Comparison Industry Standard Most industrial severe service valve "warranties" are limited to material and workmanship for one to four years. Big deal.
Comparison Our Offer We offer a PERFORMANCE GUARANTEE on each valve, plus a Lifetime Warranty on materials and workmanship. BIG difference!
Background Information Due to continuous years of research and development, coating improvements, proven manufacturing techniques and application experience, we can offer an unprecedented application-specific PERFORMANCE GUARANTEE on our isolation and control valves. Years of continual valve performance analysis, field reports and statistical service data from around the globe provide the information required to guarantee our valves for a performance time period. Now MOGAS valves come with a statistically driven, application-specific PERFORMANCE GUARANTEE…plus a Lifetime Warranty on materials and workmanship.
How It Works MOGAS will repair or replace valves at no charge should inspection indicate the valves have had external leakage or did not perform its intended purpose because of internal leakage during the application specific, pre-determined time period.
Guarantee Conditions The valve meets MOGAS' application specifications
The valve is operated within the intended design and operating parameters provided to MOGAS
The valve is installed and operated properly per MOGAS Operation and Maintenance Manual
MOGAS is contacted within 48 hours should a performance problem occur
This guarantee does not cover deterioration from corrosion
Guarantee Duration The length of the PERFORMANCE GUARANTEE will be determined by the application itself and the customer's specific needs. In other words, years of valve operating data and the specific application conditions will drive the provisions of the PERFORMANCE GUARANTEE. Pre-set individual time periods are recommended for each specific process once all operating conditions are disclosed.
How We Can Make This Offer We are able to offer this important change due to more than 50 years of R&D, coating improvements, proven manufacturing techniques and application experience. Years of continual valve performance analysis, field reports and statistical service data from around the globe provide the information required to guarantee a performance time period.
Additional Benefits Introduction Our customers not only get a quality valve, they are also eligible for assistance with:
Additional Benefits On-site services (start-up and commissioning, field support, major shutdown planning)
Managed inventories
Walkdown evaluations
Online valve management program
Certified training
Bottom Line We spend our time making the best performing severe service metal-seated valves—not necessarily the "cheapest" or the "only-has-to-pass-test-at-the-factory" valves. That's not what we do. Instead, we supply reliability. We provide dependability. We offer confidence. We engineer, manufacture and support serious valves for serious applications.